Feltro isolante de aerogel
Aerogel insulation felt is made by combining aerogel and glass fiber. It’s widely used in industries due to its excellent thermal insulation and lightweight properties.
- 650
Maximum operating temperature (℃)
- 180
Bulk Density (kg/m³)
- ≥83
Compression strength (kPa)
- -1.2
Heating permanent line change (%) (≤)
Kerui Aerogel Insulation Felt Technical Data Sheet
| Specifications and models | IIIA aerogel felt | IIIA aerogel roll | IVA aerogel roll | Test standards | |
|---|---|---|---|---|---|
| GB/T 34336-2017 Nanoporous aerogel composite insulation products | |||||
| Appearance | Flexible coiled material, mainly white, color can be customized (the surface should be flat, without scratches, stains, or damage that would hinder use) | GB/T 34336-2017 | |||
| Thickness (mm) | 0.5、1.0、2.0 | 3、5、10、15、20 | / | ||
| Width (mm) | 1500 | / | |||
| Thermal conductivity | Average temperature 25℃ | ≤0.021W/(m·K) | GB/T 10294-2008 | ||
| Average temperature 200℃ | ≤0.027W/(m·K) | ||||
| Average temperature 300℃ | ≤0.035W/(m·K) | ||||
| Average temperature 500℃ | ≤0.065W/(m·K) | ||||
| Volume density (kg/m3) | 180 | GB/T 34336-2017 | |||
| Hydrophobicity | 99.90% | GB/T 10299-2011 | |||
| Combustion level | Level A1 | GB 5464-2010 | |||
| GB/T 14402-2007 | |||||
| Compression strength | ≥83kPa | GB/T 34336-2017 | |||
| GB/T 13480-2014 | |||||
| Compression rebound rate | 99% | GB/T 34336-2017 | |||
| Vibration mass loss | ≤1% | GB/T 34336-2017 | |||
| Maximum operating temperature | 650℃ | 650℃ | 950℃ | GB/T 34336-2017 | |
| GB/T 17430-2015 | |||||
| GB/T 5480-2017 | |||||
| Heating permanent line change | -1.20% | GB/T 17911-2018 | |||
| Corrosiveness (for covering austenitic stainless steel) | Stress corrosion | The blank test specimens did not show any cracks, and the sample specimens did not show any cracks either. | GB/T 17393-2008 | ||
| PH value of leaching solution | 7.4 | GB/T 17393-2008 | |||
| w（SiO32-）+w(Na+) | 0.05% | GB/T 17393-2008 | |||
| JC/T 618-2005 | |||||
Feltro isolante de aerogel
The flexible felt material is made by combining aerogel and glass fiber using the sol-gel in-situ composite process. It is widely used in the fields of petrochemical industry, high-temperature steam pipelines, new energy vehicles and building exterior wall insulation. Aerogel insulation felt has been widely used in power plants, petrochemicals, steam pipelines, high-speed trains, fast-installed houses, and new energy vehicle industries due to its excellent thermal insulation performance and lightweight characteristics.
English
简体中文
العربية
Русский
Français
Deutsch
Ελληνικά
Italiano
日本語
한국어
Bahasa Indonesia
Português
Español
Türkçe
Slovenščina
繁體中文
香港中文